Maunfacturing and Engineering jobs in Burntwood
If we could be talking of one the widest employment sector, then the manufacturing & engineering sector cannot be left out. It has the lions share. In the UK alone, estimates indicate that the sector has amassed closer to three million people. The industry is so big because it is so diversified. Almost all the products that we use in our homes, offices, farms, industries and almost everywhere you can think of normally have to have been manufactured or engineered. Despite its fast growth, one of the challenges that the industry has been facing over the years is the stagnation in the economy. It has been realised that many goods are produced but then they do not get enough market, more so there is so much competition.The industry has been greatly boosted by the technological developments. In most cases, most production operations are computerised. This is coupled with the fast and efficient communication systems which have made it easier to transact business over the internet. In the UK and in the Burntwood manufacturing industry, most of the jobs are uniformly distributed because there are so many manufacturing firms spread across the region too.
Perhaps you have a burning desire in becoming one of the engineers in one of the production firms or in Burntwood Engineering jobs. There are few things that you may need to know about engineering, it needs a lot of dedication and handwork. Once you take the job, you will need to perform to your level best and you can be assured of a very good salary at the end of the month. Engineers are some of the most highly paid people around the world. In the UK an average engineer takes home a good salary which is close to twenty to twenty three thousand pounds per month. That should be something to something to smile about and take up this job if you are lucky to secure one.
Principal Engineer, Electric Motor and Drive Systems |
| Goodrich Corporation, a Fortune 500 company, is a global supplier of systems and services to the aerospace, defense and homeland security markets. With more than $6 billion in annual revenues, Goodrich has one of the broadest portfolios of products in the aerospace industry. The company serves a glo...more info>>> Discovered on 16/05/2012 23:52:00 |
Design Engineer / Inventor / Plumbing fittings |
| Title: Design Engineer / Plumbing Fittings
Location: Tipton (then moving to Kingswinford)
Experience in Inventor preferred
Basic salary £28000 - £30000
5% pension contribution
25 annual holiday per year plus statutory days
37 hours per week flexi time working
Background
My client is a global lead...more info>>> Discovered on 26/04/2012 23:52:00 |
Project Manager- Walsall |
| Project Manager
Excellent Negotiable Salary
West Midlands
The Company
Working for a global leader who supplies the oil and gas industry you will be guaranteed an excellent career opportunity with this business. They are a high precision manufacturing business and are looking to significantly inc...more info>>> Discovered on 31/03/2012 23:52:00 |
Manufacturing Engineer Team Leader - NPI |
| Due to our Clien'ts expansion of its NPI (New Product Introduction) Manufacturing Engineering Team an opportunity has become available for a Team Lead with experience in NPI, ideally within transmissions or from automotive or aviation industry to join the manufacturing engineering team located in Wo...more info>>> Discovered on 28/02/2012 23:52:00 |
Process/ Manufacturing Engineer (Change/ NPI) |
| A successful and expanding automotive tier 1 supplier of suspension and steering components is growing its technical capability and winning major new business.
They currently have an initial 6 month contract opportunity for a Process/Manufacturing Engineer, relating to Change and New Product Introd...more info>>> Discovered on 13/02/2012 23:52:00 |
Supplier Development Engineers (new model) |
| Supplier Development Engineers (new model)
£23,000 - £36,000 + relocation and benefits
Swindon
Just like its predecessors, the new Honda Civic is going to be built at Honda of the UK Manufacturing Ltd. in Swindon and when we reach full production capacity, we'll be producing 1 every 90 seconds. Th...more info>>> Discovered on 03/02/2012 23:51:00 |
Electrical & Instrumentation Installation Engineer |
| Electrical and Instrumentation Installation Engineer - Wolverhampton
£25,000 - 35,000 + 10% Overtime
I am looking for an installation engineer with a background in installing electrical cables, calibrating instrumentation and good crimping and soldering skills with a good general appreciation of e...more info>>> Discovered on 06/12/2011 23:52:00 |
Engineering Stores Manager |
| Job role: Engineering Stores Manager
Industry Sector: FMCG/FOOD
Duration: Permanent
Location: Burton on Trent
Salary: £25,000-£30,000
Shifts: Days
Overview
We are looking for an Engineering Stores Manager who has come from a Manufacturing/Engineering background who has the ability to help mak...more info>>> Discovered on 17/11/2011 23:52:00 |
QHSE Engineer |
| Morson International is currently working on behalf of a leading provider of specialised power conversion products and subsystems, for Naval and Land applications. They currently have a requirement for a QHSE Engineer.
Location: Rugeley, Staffordshire
Job Description: Reporting to the QHSE Manag...more info>>> Discovered on 04/11/2011 23:52:00 |
Sales Engineer (Chemical Process) |
| Sales Engineer (Chemical Process)
Stafford
£30,000 - £45,000 + company benefits tailored around your + pension + expenses.
Are you an experienced Sales Engineer with a Chemical background?
Are you looking to join a company renowned within the industries as a leader of quality solutions? On offe...more info>>> Discovered on 24/10/2011 23:52:00 |
Senior Processa nd Project Manager |
| Our client is a multi-site/multi-discipline market leader in the food and drink industry. There is an immediate opportunity for a senior Process and Project Engineer, to provide technical process engineering expertise in order to maximise the manufacturing and production process on site.
Role:
Repor...more info>>> Discovered on 26/09/2011 23:52:00 |
Product Design Engineer (bathrooms/ kitchens) |
| Qualifications:
Engineering Degree/HND or Industrial Design BSc
Engineering Apprenticeship
Experience:
Essential
Proven track record in design engineering.
Competent 3D CAD user ideally SolidWorks
Knowledge of general manufacturing processes, particularly moulded component and extrusion design.
D...more info>>> Discovered on 22/09/2011 23:52:00 |
New Product Introduction Engineer |
| New Product Introduction Engineer
BIRMINGHAM
PERMANENT
MANUFACTURING
£35,000
COMPANY
A manufacturing company based in the Birmingham area are now looking to recruit for a NPI engineer to support their quality function.
You will be responsible for handing over the customer's requirements to t...more info>>> Discovered on 09/09/2011 23:52:00 |
Project Team Engineer |
| Project Team Engineer - £25k + Benefits - Global Leader in Design & Manufacture of flow control equipment
Our client is recognised as the global leader in the Design & Manufacturer high quality flow control equipment. Due to expansion they are looking for a Project Engineer/Project Coordinator to ...more info>>> Discovered on 05/09/2011 23:52:00 |
Aerospace Thermal Design Engineer |
| Assystem are currently working closely with a prestigious company who have been providing products for Aerospace use for over 90 years ranging from the inception of aircraft to aero-engine manufacture in Great Britain. Our client prides itself on supplying an integrated range of heat transfer and fl...more info>>> Discovered on 18/08/2011 23:52:00 |
Production / Manufacturing Engineer - Aerospace |
| Our Large Engineering client based in Wolverhampton requires a Production/Manufacturing Engineer for a 12 month contract:
Rate: £28 - £32.00 / hour LTD
Duration: 12 months
Key Requirements:
Experience in a CNC/Fabrication machining environment
Some knowledge of precision milling and turning
Knowle...more info>>> Discovered on 10/08/2011 23:52:00 |
Senior Electronics Engineer (Power Electronics / SMPS) |
| Senior Electronics Engineer (Power)
Defence / Aerospace
North West - Manchester
Permanent Position
30-35K+Benefits
A leading organisation involved with the design and development of complex electro mechanical products for use with the aerospace sector requires an experience Electronics Engineer to ...more info>>> Discovered on 31/07/2011 23:51:00 |
Production Operator (Manufacturing, Engineering) BLUP2196 |
| Production Operator (Manufacturing, Engineering) BLUP2196
Stafford
£9.58 per hour (shift working), rising to £10.53 per hour once trained
Established in 1860, our Client Is a multi-billion global leader in the design and manufacture of floors, ceilings and cabinets with a focus on innovation, desig...more info>>> Discovered on 29/07/2011 23:52:00 |
Test & Commissioning Engineer |
| Role:
Input into and approval of commissioning documentation in support of commissioning activities. Execution of testing activities in a timely and safe manner within own area of expertise in accordance with the commissioning documentation requirements. Generation of test reports with findings and ...more info>>> Discovered on 27/07/2011 23:52:00 |
Production Engineer, Mechanical, Staffordshire, £25, 000 |
| Based in Stoke on Trent this innovative product design group are looking for an experienced Production Engineer to join their expanding business.
Responsibilities:
The Production Engineer will be responsible for developing the resources required to manufacture product designs in a safe and effici...more info>>> Discovered on 25/07/2011 23:52:00 |
Prefabrication Project Engineer |
| Our client is a leading prefabrication company that specialises in themodularisation of pipework and packaged plantrooms for the M&E sector and currently requires an experienced HVAC Project Engineer to join their busy engineering team based in the Midlands.
The main duties will include:
-Control ...more info>>> Discovered on 28/06/2011 23:52:00 |
Team Leader (Engineering, Manufacturing) BLUT1941 |
| Team Leader (Engineering, Manufacturing) BLUT1941
Stafford
£10.96 per hour (Shift Working)
Established in 1860, our Client is a multi-billion global leader in the design and manufacture of floors, ceilings and cabinets with a focus on innovation, design and environmental sustainability. They serve ...more info>>> Discovered on 21/06/2011 23:52:00 |
Multi Skilled Maintenance Technician |
| Multi Skilled Maintenance Technician
Duties : The Multi Skilled Maintenance Technician will be responsible for the maintenance / fault finding and repair of a range of CNC machining centres. More specifically, electrical, mechanical, pneumatic and hydraulic systems. You will also be required to act...more info>>> Discovered on 26/05/2011 23:52:00 |
Manufacturing Engineers X 2 |
| Two Manufacturing Engineers are required to support product introduction. Principal Accountabilities:* Delivery and implementation of Manufacturing Engineering projects (preparation of manufacturing documentation, CNC programmes and capability studies).* Work to meet program milestones to schedule a...more info>>> Discovered on 25/05/2011 23:52:00 |
Tendering Manufacturing / Production Engineer |
| PURPOSE:
The person will be responsible for the controlled implementation and co-ordination of manufacturing / production estimates and scope for tasks associated with the timely submission of winning tenders. The Manufacturing / Production engineer will report directly to the Tendering Co-ordinatio...more info>>> Discovered on 18/05/2011 23:53:00 |
Engineer Condition Monitoring |
| Engineer, Generator Condition Monitoring - Stafford - Salary £Neg
You will provide design, technical and manufacturing information for the provision of condition monitoring solutions on rotors, stators, exciters and auxiliary systems. Implement projects from tender, order, design, installation, and...more info>>> Discovered on 30/03/2011 23:52:00 |
Manufacturing Engineering Project Engineer |
| Company Profile:
Our client has been a manufacturer of diesel engines and power solutions for over 75 years, to the highest levels of performance and reliability. They have grown to become one of the leading suppliers of diesel and gas engines in the power solutions market.
Job Location:
Staffords...more info>>> Discovered on 14/03/2011 23:52:00 |
Methods and Tools Engineer |
| Methods and Tools Engineer - Stafford
T&D Substation Automation Solutions is a global leader in the fields of design and manufacture of Substation Intelligent Electronic Devices which deliver Protection, Measurement and Datacom functionality to our customers around the world.
Reporting to the Glob...more info>>> Discovered on 24/02/2011 23:51:00 |
Embedded Middleware Engineer |
| Embedded Middleware Engineer Alstom Stafford UK
T&D Substation Automation Solutions is a global leader in the design and manufacture of Substation Intelligent Electronic Devices which deliver Protection, Measurement and Datacom functionality to our customers around the world
In this role you will:...more info>>> Discovered on 22/02/2011 23:52:00 |
Mechanical / Thermal Design Engineer - Motorsport |
| We are currently looking to recruit a Mechanical / Thermal Design Engineer for our clients growing Motorsport team
A Mechanical / Thermal Design Engineer is required to supplement the existing team.
The role requires a committed and qualified engineer to work in the discipline of mechanical and th...more info>>> Discovered on 08/02/2011 23:52:00 |
Lead Manufacturing Engineer |
| Our client is a world leader in motion control technology with a presence in a variety of markets. They are looking to appoint a PRINCIPAL MANUFACTURING ENGINEER to act as the focal point for manufacturing related issues to a civil programme.
Our client would be interested in seeing people who hav...more info>>> Discovered on 31/01/2011 23:51:00 |
Manufacturing Engineer - Assembly & Test |
| Manufacturing Engineer - Assembly & Test
A contract vacancy has arisen working for a prestigous aerospace company in the West Midlands. We are looking for 2 Manufacturing Engineers to join the Assembly & Test team.
Role Activities
·Provide day-to-day support within the Assembly & Test Department...more info>>> Discovered on 07/12/2010 23:51:00 |
Project engineer (West Bromwich) |
| Project engineer (West Bromwich)
£24000-26000 + Life assurance + childcare vouchers + 25 days holiday + Progression
West Bromwich
A brand new position available for an experienced Project engineer to join one of the UKs largest independent manufacturers, offering lots of support and career progres...more info>>> Discovered on 25/11/2010 23:51:00 |
Mechanical Stress Engineer |
| An exciting new opportunity has arisen for a Stress Engineer working with a world leading aerospace engineering organisation.
Working within an established team of professionals, you will need to be degree qualified in Mechanical Engineering, similar engineering or science subjects, possessing airc...more info>>> Discovered on 12/11/2010 23:51:00 |
Manufacturing Engineer (CNC) |
| Purpose of Role:
These positions are required to support the business model which demonstrates an increased ME workload due to Product Transfer to Baguio, Natural Attrition & Site Relocation. These positions have also been agreed by ACS, both Operations & Engineering
The key requirements are as fol...more info>>> Discovered on 02/11/2010 23:51:00 |
Procurement Manager |
| Our client offer design, manufacture, assembly & testing of complex, high-intergrity mechanical and electromechanical plant equipment as well as waste management and decommissioning front-end engineering and methodologies.
They currently have a requirement for a Procurement Manager.
-Candidates wi...more info>>> Discovered on 18/10/2010 23:51:00 |
Quality Engineer - Supplier Facing |
| Our Client is an Industry leader in the manufacture and supply of mechanical components to the transportation industry; they are currently looking to recruit a Quality Engineer in a supplier facing role. You will be responsible for supporting the quality department, liaising with suppliers, ensuring...more info>>> Discovered on 14/10/2010 23:51:00 |
Engineering Leader |
| Our client, who are market leaders within their field along with an excellent heritage, are looking to appoint and Engineering Leader to join their well established team.
This is a senior position within the companies management team reporting directly to the Plant Manager.
The successful candid...more info>>> Discovered on 04/10/2010 23:51:00 |
Coffee Machine Service Engineer |
| Coffee Machine Service Engineer
Up to £24,000 + Vehicle + Overtime + Call Out.
Wolverhampton
I am currently recruiting for a leading organisation that deals in the installation and full technical maintenance on Traditional, Automatic and Bean to Cup Coffee Machines.
My client is now seeking an add...more info>>> Discovered on 29/09/2010 23:51:00 |
Production Technician |
| Company Profile:
Our client has been a manufacturer of diesel engines and power solutions for over 75 years, to the highest levels of performance and reliability. They have grown to become one of the leading suppliers of diesel and gas engines in the power solutions market.
Job Location:
Wolverham...more info>>> Discovered on 28/09/2010 23:51:00 |
Catia V5 / AVA Application Engineer |
| CATIA V5 / AVA Application Engineer
Amoria Bond require an Application Engineer with proficiency in Catia V5 for a long-term contrtact, to start asap with a client within automotive sector.
The Geometry Authoring team is part of the Tools and Technologies department that is responsible for all asp...more info>>> Discovered on 27/09/2010 23:51:00 |
Multi Skilled Maitenance Engineers |
| MULTI SKILLED MAINTENANCE ENGINEER
FMCG/FOOD
SHIFTS 4 ON 4 OFF (12 HOUR SHIFTS)
WEST BROMWICH
4-6 WEEKS PLUS CONTRACT
£14-16PH LTD
ASAP START
An excellent opportunity has arisen for a Multi skilled maintenance Engineer to join one of the UK's leading food manufacturers. You must have recent FOOD /...more info>>> Discovered on 17/09/2010 23:51:00 |
Sales Engineer - Laser Fabrication - Wolverhampton |
| Technical Sales Engineer
Laser Fabrication / Laser Cutting
Selling to agricultural, automotive, off-highway and lighting industries
Established midlands based company
£30k - £33k basic plus car and package
Repeat orders
Some programming for the lasers
Excellent newly created opportunity to work for...more info>>> Discovered on 15/09/2010 23:51:00 |
Senior SCADA Engineer |
| We currently have an urgent requirement for a Senior SCADA Engineer to work for a leading System Integrator in the Utilities industry, based in Staffordshire.
Summary of main purpose of the job:
Working as part of a team to design & implement wide area SCADA telemetry control systems and related so...more info>>> Discovered on 04/09/2010 23:51:00 |
Design Engineer - Aerospace |
| Detail Design Engineer - Contract Role - Wolverhampton
Currently my client is looking for a professional design engineer to work on aerospace projects based in Wolverhampton.
Previous experience working with aerospace actuators is highly desirable for the successful candidate, as the design work w...more info>>> Discovered on 02/09/2010 23:51:00 |
Project / Process Engineer |
| Project / Process Engineer (Automotive Tier 1)
Location - M5 Corridor (commutable from Black Country or Birmingham)
Salary - to £38,000 + Benefits (Contract or Permanent)
Recognised as a European market leader in the manufacturer of high specification automotive components and systems to many of ...more info>>> Discovered on 31/08/2010 23:51:00 |
Maintenance Engineer / Technician |
| MAINTENANCE ENGINEER / TECHNICIAN
Posted by: Quantica
Job title: Maintenance Engineer / Engineering Technician
Location: Wolverhampton, Telford, Stafford
Basic: £30,000
Benefits: Overtime, Pension, Healthcare
The company:
*Food manufacturing company continuing to invest heavily in their Staffordsh...more info>>> Discovered on 27/08/2010 23:51:00 |
Graduate Customer Engineer |
| This is a great opportunity for a Graduate Customer Engineer to join a growing and successful family-owned business based in Wolverhampton. Our client make specialist drop forgings for a variety of mainly UK based industries and are offering this opportunity for a graduate to be mentored by an exper...more info>>> Discovered on 26/08/2010 23:51:00 |
Manufacturing Engineer, Strategy |
| We are currently looking to recruit a Manufacturing Engineer (Manufacturing Strategy) to work on an estimated 12 month contract for our client, a large aerospace engineering organisation at their site in Hucknall, Nottingham.
You will be responsible for assisting in the development of the manufactu...more info>>> Discovered on 30/06/2010 16:34:00 |