Maunfacturing and Engineering jobs in Nuneaton
The manufacturing and engineering industries in the UK have been playing an important role in increasing UK’s working population by offering more job opportunities. Citizens of UK have benefited a lot as the industry gives jobs to both skilled and unskilled workers. Many more jobs are now being offered in the engineering sector than before due to the emphasis made by the government and NGOs on enhancing the development of the engineering sector. The manufacturing industry however has been faced by major setbacks mainly as a result of the economic recession. Though UK has one of the largest manufacturing industries in the world, the country is now striving to remain in the world market by outsmarting competitive countries. The situation has been made worse with other nations offering cheaper products forcing the country to go back to the drawing board.Jobs in the Nuneaton manufacturing industry include distribution, design, IT and sales. Considering the nature of these jobs, technical knowledge is a must. Such jobs are almost equally distributed all over UK with a few exceptions for example, the central location of the midlands favours car manufacturing than other areas. This is because cars can easily be shipped to generally all cities in the UK and ports if they are for export. Approximately UK 3.000.000 workers are employed in the manufacturing industry. Degree holders and people with NVQs tend to receive good salaries with minimum pay being around £15,000. However in most cases the pay depends on the job done and the employer one is dealing with.
The engineering sector has a high demand for workers due to the rapid growth experienced in the industry. Nuneaton Engineering jobs however are preserved for highly skilled and qualified personnel. Skills required vary from administration office based roles to more demanding roles in the security forces. The wage rate is also attractive as a well qualified new engineer can be given a starting salary of £23,000. Job seekers can also utilise international job vacancies in this industry.
Accessories Buyer |
| TRIUMPH MOTORCYCLES
HINCKLEY, LEICESTERSHIRE
Accessories Buyer (Maternity Leave Cover)
The role
With over 110 years of history behind us, Triumph is still a privately owned British company. Our motorcycles are designed, developed and built at our Hinckley factory, one of the most technologically ...more info>>> Discovered on 12/05/2012 23:52:00 |
Chassis Target Setting Engineer |
| Chassis Target Setting Engineer Contract - 6 months Near Coventry Up to £36 ltd an hour
A contract engineering opportunity is now available within an automotive consultancy in the Midlands. They require a chassis target setting engineer to join the team and assist with verifying chassis designs as ...more info>>> Discovered on 11/05/2012 23:53:00 |
Manufacturing Engineer - Simulation |
| Assystem is looking for a Manufacturing Engineer - Simulation. Contracts until 31/12/13 on offer paying Limited company rate of £23.93 per hour based in Warwickshire.
Position Description:
T&F Simulation engineer, Virtual Man Eng, Advanced Man Eng. Simulation activities involve detailed process a...more info>>> Discovered on 09/05/2012 23:52:00 |
Lead Mechanical Engineer (Mechanism Design & Product Dev Medical |
| Lead Mechanical Engineer Mechanism Design & Product Development
Bristol, Bath, Newport, Cambridge, Cardiff, Coventry, Leamington Spa, Kenilworth, Rugby, Solihull, Stratford-on-Avon, Warwick,
Salary Package typically £35k to £55k plus profit related pay schemes and discretionary bonus
We are lookin...more info>>> Discovered on 29/04/2012 23:51:00 |
Technical Engineer - Safety Component Systems |
| Assystem is looking for a Technical Engineer - Safety Component Systems. Contracts until 31/03/13 on offer paying Limited company rate of £25.66 per hour based in Warwickshire.
Customer Order Number 22420
Position Description:
Engineering Specialist for the development and integration of Safety ...more info>>> Discovered on 25/04/2012 23:52:00 |
Graduate Trainee - Engineering |
| Opportunities this good don't come round too often!!!
Global leader in Industrial Automation within the Automotive and Aerospace sectors seeks tallented and ambitious graduate trainees.
You will benefit from continuous training on the job program, from Concept engineering , Process design thro to ...more info>>> Discovered on 18/04/2012 23:52:00 |
Maintenance Controls Engineer |
| We are working on behalf of a prestigious Automotive Manufacturer based in the West Midlands are currently seeking an experienced Maintenance (Controls) Engineer to be responsible for the maintenance of all equipment and facility controls/software within manufacturing engineering division.
The suit...more info>>> Discovered on 17/04/2012 23:52:00 |
Manufacturing Engineer NPI |
| Sitec is seeking an experienced Manufacturing Engineer NPI for our prestigious client to work at their Ansty, Coventry site on an estimated 6 month contract.
Our client is a global business, providing and supplying integrated power systems for use on land, sea and air. They have established a stron...more info>>> Discovered on 23/03/2012 23:52:00 |
Layout Engineer |
| Job Title
Layout Engineer
Salary
Negotiable
Benefits
Overtime, Pension, 25 days holiday (plus bank holidays)
Location
Commutable from Birmingham, Coventry, Solihull, Warwick, Redditch, Leamington Spa, Rugby, Nuneaton, Lutterworth, Leicester, Tamworth, Daventry, Warwickshire, West Midlands
The Co...more info>>> Discovered on 22/03/2012 23:52:00 |
V5 CAD Engineer - Safety Components |
| Assystem is looking for a V5 CAD Engineer - Safety Components. Contracts until 31/03/13 on offer paying Limited company rate of £26.07 per hour based in Warwickshire.
Customer Order Number 22241
Position Description:
-Catia v5 CAD Engineer Safety Components Group (Body Engineering)
-Creation of ...more info>>> Discovered on 14/03/2012 23:52:00 |
Project Engineer/ Coordinator (Pressings) £25k+ |
| We are working with a small sub contract pressings manufacturer who supplies a range of small to medium parts to a number of industries, including the automotive industry.
Do to reorganisation they are seeking to appoint a new Project Coordinator/Engineer to join their busy team in Birmingham.
Ove...more info>>> Discovered on 28/02/2012 23:52:00 |
Electrical Systems Engineer - Launch Support |
| Assystem is looking for an Electrical Systems Engineer - Launch Support. Contracts until 31/03/13 on offer paying Limited company rate of £30.21 per hour based in Warwickshire.
Customer Order Number 21591
Position Description:
-Electrical Launch support engineer - to support the Launch leader in ...more info>>> Discovered on 22/02/2012 23:52:00 |
Software Engineer Manufacturing Machinery |
| As a software engineer you will be responsible for the design and implementation of various control systems and software applications to meet the customer requirements for certain projects. Key responsibilities include; analysing customer requirements, researching, designing and writing new software...more info>>> Discovered on 08/02/2012 23:52:00 |
Manufacturing & Final Process Engineer |
| Assystem is looking for a Manufacturing & Final Process Engineer. Contracts until 31/12/11 on offer paying Limited company rate of £21.42 per hour based in Warwickshire.
Customer Order Number 20806
Position Description:
Trim & Final Process Engineer, Advanced Manufacturing Engineering
Skills Re...more info>>> Discovered on 07/02/2012 23:52:00 |
EDS E3D Packaging Engineer |
| Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
This role is based in the West Midlands, close to the M40 and i...more info>>> Discovered on 06/02/2012 23:52:00 |
Project Commercial Co-ordinator |
| Project Commercial Co-ordinator
To £30,000 per annum + Benefits
Our Award-winning client is an extremely successful Global operation who design and manufacture original equipment components for the world's leading Automotive organisations. Due to expansion, our client is now seeking to appoint a P...more info>>> Discovered on 25/01/2012 23:52:00 |
Project Engineer - Door Systems |
| Assystem is looking for a Project Engineer - Door Systems. Contracts until 31/12/12 on offer paying Limited company rate of £27.61 per hour based in Warwickshire
Customer Order Number 21243
Position Description:
Specialist Engineer for Door Systems (Handles, Locks and Mechanisms) for forward mode...more info>>> Discovered on 23/01/2012 23:52:00 |
Maintenance Engineer - Continental Shift |
| Maintenance Engineer - (Electrical)Continental Shift Pattern
Northampton, Milton Keynes, Banbury, Coventry, Daventry, Oxford,
Salary £36k
Profile
The successful Maintenance Engineer will be a multi-skilled Engineer. The right candidate is from an automotive background with knowledge of general m...more info>>> Discovered on 22/01/2012 23:51:00 |
Maintenance Engineering Supervisor |
| Lead Maintenance Engineer / Maintenance Supervisor
Maintenance Engineering professional required in a lead role to supervise a team of multi-skilled maintenance engineers with high volume manufacturing company.
We require a proactive and organised leader to manage the day to day engineering operatio...more info>>> Discovered on 16/01/2012 23:52:00 |
Applications Engineer (Fuel Systems) - Automotive |
| We are currently working with one of the UK's leading automotive manufacturers, supporting the growth of their business through the recruitment of high calibre and experienced Engineering staff.
Due to internal promotion, they are seeking to appoint a new Applications Engineer to join their busy En...more info>>> Discovered on 09/01/2012 23:52:00 |
CFD Applications Engineer Midlands |
| CFD Applications Engineer - Automotive aerodynamic and Thermal CFD - Midlands based £35-45k
You will have a CFD background within Automotive or Motorsport industries. ( Solid knowledge of fluid dynamic fundamentals. )
You will be based in the United Kingdom, preferably in the Midlands.
You will ...more info>>> Discovered on 08/01/2012 23:51:00 |
Pack and Dispatch Operative |
| My client, due to expansion and winning several contracts, have a requirement for a Pack and Dispatch Operative.
The Role would involve packing and sealing aerospace parts, that would be ready for dispatch as they are set to be delivered to the required recipients. Due to the nature of the role, y...more info>>> Discovered on 05/01/2012 23:52:00 |
UGV Software Engineers |
| UGV Software Engineer
Nuneaton
£30,000 - £40,000
Our client is a world class independent engineering and test consultancy. They are seeking a Software Engineer to provide algorithm and software solutions for UGV (unmanned ground vehicle) application projects and control system development. The succ...more info>>> Discovered on 13/12/2011 23:52:00 |
Body in White Simulation Engineer |
| Assystem is looking for Body in White Simulation Engineer. Contracts until 31/03/12 on offer paying Limited company rate of £33.54 per hour based in Warwickshire.
Customer Order Number 21495
POSITION DESCRIPTION:
Virtual Manufacturing can be considered an enabling technology that supports the ze...more info>>> Discovered on 08/12/2011 23:52:00 |
Supplier Recovery Project Engineer |
| Our Client a 1st tier supplier to automotive OEMs is looking to recruit a Supplier Recovery Project Engineer to be field based out of Coventry.
Location Home Location - Midlands / Role - Field Based
Main Purpose
The position necessitates an additional active and core role in the Warranty Recover...more info>>> Discovered on 06/12/2011 23:52:00 |
Electrical & Controls Design Engineer - Senior |
| Our client is renowned as a world leader in the competitive and technically demanding arena of bespoke special purpose production and packaging machinery and automation solutions, a reputation attained as a result of consistent success in all areas of new product development and impressive innovatio...more info>>> Discovered on 26/11/2011 23:51:00 |
Manufacturing Engineer (Aerospace) |
| Manufacturing Engineer (Aerospace)
£40-45k plus pension & benefits
Based: Leicester
This company is a specialist supplier of machined and assembled products into the aerospace industry. Ran with a family ethos but with the stability and structure of a corporate owner its one of the best firms ...more info>>> Discovered on 25/11/2011 23:52:00 |
Unit and Engineering Manager |
| Out client is seeking a Unit and Engineering Manager for its Small Steam Turbine (TET) business located in Rugby in the UK. The Unit and Engineering Manager will undertake engineering associated with the design and development of industrial steam turbines, the related control and protection systems,...more info>>> Discovered on 24/11/2011 23:52:00 |
Mechanical Design Engineer (Automotive) |
| Mechanical Design Engineer (Automotive)
£35,000 - £38,000 + Pension + Private Healthcare + 33 Days Holiday + life assurance
Birmingham
Are you a Mechanical Design Engineer from an Automotive industry? On offer is an opportunity to join a specialist company where you define the projects? On offer ...more info>>> Discovered on 23/11/2011 23:52:00 |
Senior Manufacturing Engineer (CNC Machining) |
| Senior Manufacturing Engineer
£40-45k plus pension & benefits
Based: Leicester
This company is a specialist supplier of machined and assembled products into the aerospace industry. Ran with a family ethos but with the stability and structure of a corporate owner its one of the best firms in Le...more info>>> Discovered on 18/11/2011 23:52:00 |
Unit & Engineering Manager |
| Unit & Engineering Manager
To undertake engineering associated with the design and development of industrial steam turbines, the related control and protection systems, its instrumentation and the auxiliary systems.
Lead the Small Steam Turbine local Unit and the Engineering eDepartment and act ...more info>>> Discovered on 15/11/2011 23:52:00 |
CAD, CAE, Packaging & Modeling within Automotive Engineering |
| Jaguar Land Rover (JLR) are looking for good engineers and managers, skilled at developing and managing projects and their timing - JLR contract fees are excellent and the contract durations are now long term - and experience, so far, is that contracts are being extended on a rolling basis for good ...more info>>> Discovered on 06/11/2011 23:51:00 |
Facilities Manager/ Engineer |
| Facilities manager/ engineers £35-45kpa
Select' - PARKHOUSE'S Senior Engineering Consultant is currently recruiting for experienced Facilities Manager/ Engineers to join our expanding international client, based in Coventry.
THE COMPANY:
Our client is the Ultimate client for anyone wanting a caree...more info>>> Discovered on 29/10/2011 23:51:00 |
Cost Engineers/ Estimators (10+) |
| Cost Engineers/Estimators (10+) required for full-time positions based in the Midlands working for a high profile automotive client.
Job Description
Cost Engineering enables us to take exciting journeys as a business. Providing robust financial information and expert strategic insight, this key de...more info>>> Discovered on 27/10/2011 23:52:00 |
Quality Inspector- Aerospace/ Precision Engineering |
| Job Title: Quality Inspector- Aerospace/Precision Engineering
Location: Birmingham
Basis: Permanent
Ref: MM-EPR090467
Quality Inspector is sought to join a leading company involved in the development and manufacture of precision engineering components for the aerospace and associated industries. Ke...more info>>> Discovered on 26/10/2011 23:52:00 |
Graduate Control Systems Engineer |
| Job Title
Graduate Control Systems Engineer
Location
Commutable from Warwick, Rugby, Birmingham, Coventry, Leamington Spa, Leicester, Lutterworth, Nuneaton, Solihull, Stevenage, Luton, Hemel Hempstead, Dunstable, Hitchin, Warwickshire, West Midlands, Bedfordshire
Salary
£23,000 - £26,000 pa
Benef...more info>>> Discovered on 20/10/2011 23:52:00 |
Trainee Electrical Design Engineer |
| Position - Trainee Electrical Design
Salary - £18k - £22k
Location - East Midlands
The Company:
Part of a $billion family owned co-operation, my OEM client provides specialist packaging machinery for various manufacturing companies, ranging from sweets and pea's to pharmaceutical and more.
Success...more info>>> Discovered on 19/10/2011 23:52:00 |
Plant Quality Engineer |
| PLANT QUALITY ENGINEER - AUTOMOTIVE TIER 1
Recognised as a global market leader with an enviable reputation for design and engineering excellence, our client is driven by product quality, customer focus and a commitment to world class manufacturing excellence. Supplying to many of the worlds leadin...more info>>> Discovered on 18/10/2011 23:52:00 |
SQA Engineer |
| Supplier Quality Engineer
Salary: Attractive Benefits: Attractive Benefits
Location: Coventry Job
Type: Permanent - Full-time - 37 Hours
Job purpose:
You will be responsible for planning and coordinating Quality activities, SQA and New Part Introduction Programmes.
Key responsibilities:
-...more info>>> Discovered on 13/10/2011 23:52:00 |
Maintenance Controls Engineer (Manufacturing) |
| Our client a prestigious Automotive Manufacturer based in the West Midlands are currently seeking an experienced Maintenance (Controls) Engineer to be responsible for the maintenance of all equipment and facility controls/software within manufacturing engineering division.
Job Purpose
The incumben...more info>>> Discovered on 12/10/2011 23:52:00 |
Engineering Manager/ Supervisor/ Team leader/ |
| POSTED BY: Quantica
JOB TITLE: Engineering Manager/ supervisor/ Team leader/
LOCATION(S): Rugby, Northampton, Coventry, Daventry, Nuneaton,
SALARY: £40-43k
BENEFITS: 4 on 4 off, pension, Healthcare
REFERENCE: MP-ETL-MC
ROLE INFORMATION (KEY RESPONSIBILITIES):
* As a Shift Engineering Manager yo...more info>>> Discovered on 05/10/2011 23:52:00 |
Senior Powertrain Design Engineer |
| JOB SUMMARY
Responsible for leading the design process of components from concept to production in order to achieve the product objectives within a specified time.
ESSENTIAL DUTIES & RESPONSIBILITIES:
1. Establishes a reasonable project development schedule from concept to production implementati...more info>>> Discovered on 03/10/2011 23:51:00 |
CVontrol Systems Electrical Engineer |
| Job Advert
Job Title: Control Systems - Electrical Engineer
Location: Coventry
Basis: Permanent
Ref: DF-EPR089171
Our client is a world leader in custom machinery and product solutions for the packaging and processing sector. They develop and launch new products that enable their customers to ac...more info>>> Discovered on 30/09/2011 23:52:00 |
NPD Food Technologist |
| NPD Technologist
Coventry
Up to £23,000
As the NPD Technologist you will be fully involved in the entire NPD process, supporting projects to create innovative products from initial concept, through to launch. Within this role, you will organise factory trials, prepare lab samples, write specificati...more info>>> Discovered on 27/09/2011 23:52:00 |
Precision Manufacture - Mechanical Fitter |
| My client is a small niche business with a truly impressive global client base and huge growth potential. Working in a very specialist field they have become the answer of choice for a variety of precision engineering and scientific organisations.
They are currently looking to appoint either a Serv...more info>>> Discovered on 25/09/2011 23:51:00 |
Principal EDS Engineer |
| Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
This role is based in the West Midlands, close to the M40 and i...more info>>> Discovered on 24/09/2011 23:51:00 |
Aseptic Production Engineer |
| COMPANY INFORMATION:
This company are a large, branded, multinational FMCG business who are looking to recruit an aseptic production engineer to strengthen their team.
YOU MUST HAVE THE FOLLOWING:
* Excellent aseptic knowledge and experience within the FMCG sector
* Experience within engineering an...more info>>> Discovered on 14/09/2011 23:52:00 |
Costing Engineer - £25k |
| Job Title: COSTING ENGINEER - £25k
Industry: Engineering
Salary: £20,000 - £25,000 plus benefits
Location: Coventry, West Midlands, Warwick, Leamington Spa, Kenilworth, Nuneaton, Solihull
COMPANY
My client delivers mechanical and electrical engineering solutions to defence and aerospace companies ...more info>>> Discovered on 05/09/2011 23:52:00 |
Maintenance Engineer (Electro-Mechanic) |
| Maintenance Engineer / CNC / NC / Electromechanical Maintenance Engineer - £23,300 - £24,700 + overtime rates Leicestershire
Maintenance Engineer / CNC / NC / Electromechanical Maintenance Engineer
A manufacturing facility in Leicestershire is now seeking an additional multi skilled maintenance en...more info>>> Discovered on 02/09/2011 23:52:00 |
HACCP Specialist |
| My client is a leading food consultancy offering support and advice to the food manufacturing industry globally. This role is from within their food manufacturing technologies group, they apply science and engineering principles to the solutions for the food industry.
This new role sits within the...more info>>> Discovered on 30/08/2011 23:52:00 |